MACHINERIES

Vertical Milling Machine

We have a Brand New Hectomark Vertical Milling Machine (Made in Taiwan). It is a precision tool used for shaping and fabrication by the removal of stock typically from metallic work pieces. Plastics and other materials can also be machined on the mill depending upon tooling and material. Mill controls may be manually operated, computer numerical controlled (CNC), or a combination of both. Mill machining and material removal is typically made by a rotary cutter held in a spindle. Cutting options are more sophisticated and variable than a drill press by virtue of a moveable table and/or vise (x and y-axes) and vertical spindle movement (z-axis). Many vertical mills also have a rotatable turret for the upper cutting head which provides even greater machining options (b-axis).

Lathe Centres

We have 3 different Lathe Centres of different brands. Those are HMT, Sakthi and Kirloskar with bed dimension of 350x1200mm, 400x1500mm and 200x1500mm respectively. It is a tool that has been ground to a point to accurately position a workpiece on an axis. They usually have an included angle of 60°, but in heavy machining situations an angle of 75° is used. The primary use of a center is to ensure concentric work is produced; this allows the workpiece to be transferred between machining (or inspection) operations without any loss of accuracy. A part may be turned in a lathe, sent off for hardening and tempering and then ground between centers in a cylindrical grinder. The preservation of concentricity between the turning and grinding operations is crucial for quality work.

DRILLING CUM TAPPING MACHINE

We have an ITCO made Drilling and Tapping Machine. Drilling and tapping are two different actions. Drilling refers to creating a smooth hole in a material with a drill and motor. Tapping is the action that creates a thread into the side of the hole. A variety of taps are available to match almost any screw type available, including metric and standard measurements. Information required to select the drill bit includes thread count, diameter, thread pitch, and coarse/fine threads.

MINI-RADIAL DRILLING MACHINE

We have an Everest Made Mini Radial Drilling Machine. A radial drill machine is a special purpose drilling machine. It normally has a drilling head that is mounted to slide along the radial arm. This radial arm can be raised, lowered, or rotated, on a vertical pole in order to adjust the position of the drill above the work piece.

SURFACE GRINDING MACHINE WITH HYDRAULIC CONTROL

We have a L.M.W Surface Grinding Machine. Surface grinding is done on flat surfaces to produce a smooth finish. It is a widely used abrasive machining process in which a spinning wheel covered in rough particles (grinding wheel) cuts chips of metallic or nonmetallic substance from a workpiece, making a face of it flat or smooth.

BANDSAW CUTTING MACHINE

We've a Powerful Krishna Bandsaw Cutting Machine. A band saw (also written bandsaw) is a machine with long tooth blade rotating on wheel that cut material held by a table. It is one of the most common machine tool found in cutting workshop and industry. Basically the job of a band saw is to give shape to material that has irregular appearance. The band saw shapes material by sawing straight, round or cutting curve. Metal, wood, plastic and other materials are cut by band saw. Depending upon the material there are different type of blades used by band saw. The power to a band saw machine comes from electric motor. Many kinds of band saw machines are used today. Each of them perform similar task but has different characteristics for sawing different material.

QA32-8 ( METAL CUTTING AND SHEARING MACHINE )

QA32-8 Combined metal punching and shearing machines, are used for punching of angle steel, flat iron, C channel iron, and shearing of round bar, square bar, angle steel, flat iron, C channel iron, die cut and so on, have the characteristics of novel design, beautiful shape, compact structure, reliable performance, simple operation and convenient maintenance, quite suitable for machinery manufacturing, construction and hydro-power projects.

Max punching force: 360 kN

Cutter stroke length: 27 mm

CNC PRESS BRAKE MACHINE

The press brakes are operated by mechanical systems, by means of a crank connecting rod system or by hydraulic systems, by means of hydraulic pistons, they can be managed manually or in the more modern versions controlled by computers (CNC press brakes).

Drilling machine of 1” shank capacity

Tig welding (AC DC 230 V)

VERTICAL TURRET MILLING MACHINE

The vertical milling machine is a precision tool used for shaping and fabrication by the removal of stock typically from metallic work pieces. Plastics and other materials can also be machined on the mill depending upon tooling and material. Mill controls may be manually operated, computer numerical controlled (CNC), or a combination of both. Mill machining and material removal is typically made by a rotary cutter held in a spindle. Cutting options are more sophisticated and variable than a drill press by virtue of a moveable table and/or vise (x and y-axes) and vertical spindle movement (z-axis).